Triple Compression Scrap Metal Baler
Product Description
ENERPAT Scrap Metal Baler Advantages
1.Triple-acting Auto Metal Baler (TH Series)
The TH Series triple balers are in use both in scrap yards as well as in regular operation in recycling companies. The sturdy design permits compression of stamping waste, sheet metal, cans, light profiles, wires and thin-walled pipes. Oversized scrap pieces are automatically cut by the integrated blade. Due to the triple baling and short cycle time, it is used everywhere where scrap has to be efficiently pressed into compact bales.
2.Easy operation & low maintenance
Suitable for recycling companies processing ferrous and non-ferrous metals.
fully automatic operation
Balers can be installed indoors or outdoors
Interface via intuitive touch screen, providing easy access to production parameters and operational data
Diagnostics via router
Composition and Structure
Product Details
Durability & service
Increase performance，Reduce downtime!
Robust design Pre-tensioned press box sx |
Efficiency
Reduce costs，Create value!
Excellent production rates are achieved by a combination of design and controls. |
Easy operation &low maintenance
Where you need it，When you need it!
Suitable for recycling companies processing ferrous and non-ferrous metals. |
Technical Data Sheet
| MODEL | AMB-TH-2080 | AMB-TH-2210 | AMB-TH-2212 | AMB-TH-2812 | AMB-TH-2815 | AMB-TH-6020 | AMB-TH-60201 | |
| BalesHxW(L) | mm | 250 x 250 （var.) | 300 x 300 （var.) | 300 x 300 （var.) | 400 x 400 （var.) | 400 x 400 （var.) | 600 x 600 （var.) | 600 x 600 （var.) |
| Motor Power | kW | 1 x 55 | 1 x 55 1 x 90 2 x 55 | 1 x 55 1 x 90 2 x 55 | 1 x 90 2 x 55 | 1 x 90 2 x 90 3 x 90 | 3 x 90 | 3 x 90 |
| Cycle time (no-load) | S | 25 | 34 - 23 | 38 - 26 | 40 - 36 | 46 - 28 | 60 | 69 |
| Bales/h (90% availability) | 1/h | 137 | 101 - 149 | 90 - 132 | 86 - 95 | 74 - 122 | 57 | 50 |
| Max. production capacity, Fe (bale weight) | t/h | 10 （69 kg） | 13 - 19 (124 kg) | 12 - 17 （124 kg) | 24 - 26 (264 kg) | 21 - 34 (264 kg) | 47 (791 kg) | 59 (1,130 kg) |
| Max. production capacity, Cu + Ms (bale weight) | t/h | 11 (78kg) | 15 - 22 (141 kg) | 13 - 20 (141 kg) | 27 - 30 (301 kg) | 23 - 39 (301 kg) | 54 (903 kg) | 67 (1,290 kg) |
| Max. production capacity, Al (bale weight) | t/h | 4 (28kg) | 5 - 7 (44 kg) | 4 - 6 (44 kg) | 8 - 9 (94 kg) | 7 - 12 (94 kg) | 16 (272 kg) | 20 (389 kg) |
| Cylinder forces, 1st compactor | t | 72 | 112 | 112 | 161 | 189 | 343 | 343 |
| Cylinder forces, 2nd compactor | t | 91 | 136 | 161 | 220 | 252 | 494 | 494 |
| Cylinder forces, final compactor | t | 160 | 200 | 200 | 350 | 350 | 800 | 1,000 |
| Spec. pressure final compactor | N/ cm² | 2,128 | 2,063 | 2,063 | 2,104 | 2,104 | 2,144 | 2,749 |
| Press box, (W x L x H) | mm | 795 x 1,925 x 600 | 1,020 x 2,235 x 800 | 1,245 x 2,235 x 800 | 1,245 x 2,840 x 1,100 | 1,500 x 2,840 x 1,100 | 2,000 x 6,000 x 1,600 | 2,010 x 6,000 x 1,600 |
| Feed opening, (W x L) | mm | 725 x 1,450 | 945 x 1,655 | 1,170 x 1,655 | 1,170 x 2,130 | 1,425 x 2,130 | 2,910 x 4,930 | 1,910 x 4,930 |
Machine dimensions (W x Lx H) | mm | 4,550 x 5,800 x 3,000 | 5,290 x 6,605 x 3,735 | 5,990 x 6,605 x 3,775 | 6,360 x 8,035 x 4,600 | 7,060 x 8,035 x 4,615 | 10,155 x 15,650 x 6,110 | 10,495 x 15,650 x 6,110 |
| Machine weight | t | approx. 25 | approx. 41 | approx. 44 | approx. 60 | approx. 67 | approx. 186 | approx. 201 |