303 E. Parson St. Galion, OH 44833    +1 (909)-996-3687    info@enerpatrecycling.com
EnglishEnglish
 
Reliable, Durable & Efficient 
— Your Trusted Recycling Equipment Partner
              

Menu

  • ENERPAT Shredders - Since 1936
    Shred to Recover. Recycle to Renew.
    Learn More
    电脑端banner1920x750 拷贝
  • Process 100+ Waste Types
  • Output from 10–500 mm
  • Complete Shredding & Recycling Lines
  • Global Installation & Technical Support
You are here: ENERPAT Home » Waste Shredder
Waste Shredders
Built for the long haul, ENERPAT shredders run on Siemens motors paired with Schneider electrics and chew through almost any material you feed them. Add the right modules and the system becomes a full shredding line that pulls out ferrous and nonferrous metals. Cutting is handled by Dillinger blades made in Germany, kept in stock and quick to swap, while several loading and discharge setups fit your workflow. Pick from single shaft shredders, two shaft shredders, single shaft pre shredders, and hammer mills.
The ENERPAT Two-Shaft Scrap Metal Shredder processes light to medium gauge ferrous and nonferrous scrap with a low-speed, high-torque hydraulic drive. Powerful shearing and tearing action breaks bulky scrap into manageable pieces. Its 400 kW drive processes up to 15–20 tonnes per hour and improves nonferrous metal recovery.

  • Supports high-volume scrap yards, ELV recyclers, and metal recycling plants processing vehicle bodies, bulky ferrous scrap, and nonferrous metals.


  • Reduces oversized metal into manageable pieces while improving bulk density and releasing aluminium and copper for downstream sorting.
Get A Quote
Two Shaft metal shredder
Two Shaft Metal Shredder
The ENERPAT Hammer Mill uses high-impact hammering force to crush and compress scrap metal while separating attached impurities. Equipped with wear-resistant hammers, it delivers continuous impact crushing performance for EV shells, small appliances, aluminium scrap, and light steel, improving metal purity and recycling value.

Fits auto recycling plants and metal processors that need secondary crushing after primary shredding.
Removes attached impurities such as paint and oil residues, improves metal liberation, and raises the value of recovered steel and aluminium.
Get A Quote
Hammer Mill
Hammer Mill
The ENERPAT Hammer Mill uses high-impact hammering force to crush and compress scrap metal while separating attached impurities. Equipped with wear-resistant hammers, it delivers continuous impact crushing performance for EV shells, small appliances, aluminium scrap, and light steel, improving metal purity and recycling value.

Works for e-waste recyclers, aluminium scrap processors, and facilities handling computers, appliances, and mixed discarded metals.
Grinds and cleans metal surfaces, separates different material fractions, and prepares 50–80 mm output for downstream sorting.
Get A Quote
Vertical Hammer Mill
Vertical Hammer Mill
The ENERPAT Heavy-Duty Hydraulic One Shaft Shredder is a high-efficiency shearing shredder for bulky metal waste, including can bales and broken-bridge aluminium blocks. Its hydraulic system delivers powerful, adjustable torque, while moving and fixed blades reduce materials to set sizes with overload protection for safe and efficient downstream sorting.

Fits recyclers handling bulky or compacted metal waste such as can bales, aluminium blocks, and compacted metal bales.
Uses adjustable hydraulic torque and overload protection to shred difficult materials safely before downstream separation.
Get A Quote
Heavy-Duty Hydraulic One Shaft Shredder
Heavy-Duty Hydraulic One Shaft Shredder
The ENERPAT MSA-F Series Heavy-Duty Single Shaft Shredder processes aluminium profiles, turnings, drink cans, oil filters, and other metal scrap. Powered by dual 200 kW drives with hydraulic pushing, it handles up to 10 t/h. Interchangeable screens deliver precise 20 mm output, supporting both large-scale recycling and downstream sorting.

Supports large-scale metal recyclers processing aluminium profiles, turnings, drink cans, oil filters, and similar scrap.
Combines dual 200 kW drives, hydraulic pushing, and interchangeable screens to deliver high throughput and precise 20 mm output.
Get A Quote
Heavy-Duty Single Shaft Shredder
Heavy-Duty Single Shaft Shredder
The ENERPAT Four-Shaft Shredder is a highly versatile shearing shredder for flexible and rigid materials, especially metal scrap. Its four cutting shafts deliver continuous shearing and tearing action, reducing e-waste, scrap tyres, RDF feedstock, and contaminated materials into stable, uniform sizes for efficient downstream recycling.

Fits recyclers handling bulky, mixed, or contaminated materials that still require controlled output size.
Combines multi-shaft cutting with screen-controlled sizing, producing more uniform particles than standard two shaft shredders.
Get A Quote
Four Shaft Shredder
Four Shaft Shredder
The ENERPAT MSB-E Series Two Shaft Shredder is a versatile size reduction machine designed for processing various solid waste materials. Its two counter-rotating shafts deliver powerful shearing and tearing action to reduce materials into smaller sizes. With multiple models available, it provides flexible solutions for different recycling applications and downstream processing needs.

Suits recyclers at the primary shredding stage where fast volume reduction is more important than precise particle sizing.
Helps reduce storage pressure, improve feeding efficiency, and prepare oversized waste for sorting, baling, or secondary processing.
Get A Quote
Two Shaft Shredder
Two Shaft Shredder
The ENERPAT MSA-F Series One Shaft Shredder is a versatile shearing shredder for baled tough and medium-hard materials, including industrial plastics, wood waste, and tyres. Equipped with a PLC control system, large-capacity hopper, and horizontal pushing system, it ensures stable feeding, efficient size reduction, and high throughput.

Suits recyclers with downstream processes that require consistent material size, such as washing, sorting, granulation, or reuse.
Helps avoid irregular output and unstable feeding, making recycled materials easier to classify, sell, or process further.
Get A Quote
Single Shaft Shredder
Single Shaft Shredder
The ENERPAT MSA-R1600 Tire Steel Wire Separator is built for tyre recycling and rubber processing, efficiently separating embedded steel wire from tyre chips and rubber scrap. Integrating grinding, screening, and magnetic separation, it achieves 98–99% steel recovery with up to 5 tonnes/hour capacity for high-value material recovery.

Suits tyre recyclers moving from basic tyre shredding to higher-value rubber and steel recovery.
Helps overcome the purity barrier that limits tyre chips from entering granulation, crumb rubber production, or premium downstream markets.
Get A Quote
Tire Steel Wire Separator
Tire Steel Wire Separator
The ENERPAT MSB-ETY1600 Double Shaft Tire Recycling Shredder is designed for whole tyre processing with a high-torque dual-shaft cutting system. It reduces passenger, truck, and OTR tyres into chips smaller than 50×100 mm for TDF, pyrolysis, and rubber recycling. Its modular design supports integration into complete 3 TPH tyre recycling lines.

Fits tyre recyclers moving beyond collection, storage, or baling into material recovery, TDF supply, pyrolysis preparation, or crumb rubber production.
Solves the front-end bottleneck of whole-tyre handling by enabling continuous primary shredding before steel separation, granulation, and line expansion.
Get A Quote
Tire Recycling Shredder
Tire Recycling Shredder
The ENERPAT Tyre Granulator Machine refines pre-shredded tyre chips into uniform <5mm crumb rubber after shredding and steel separation. Its optimized cutting system reduces dust and overheating while ensuring stable output quality. Suitable for rubber products, sports surfaces, and modified asphalt, it increases recycled rubber value in tyre recycling operations.

Fits tyre recyclers moving from tyre chips to higher-value crumb rubber production.
Refines pre-shredded rubber into uniform <5 mm crumb rubber with lower dust, stable quality, and broader downstream applications.
Get A Quote
Tire Granulator
Tire Granulator
FAQs
  • Q: How do I choose the right shredder for my recycling business?
    加 Created with Sketch.
    形状 Created with Sketch.
    A: Choose your shredder based on the material, required output size, and downstream process.
    • Two Shaft Shredders are best for bulky and mixed materials.
    • Single Shaft Shredders produce more controlled particle sizes.
    • Four Shaft Shredders combine the advantages of both, handling bulky materials while producing more uniform output through screened size control.
    • Hammer Mills are ideal when higher material liberation and cleaning are required.
    • Tyre Shredders are designed specifically for tyre recycling.
  • Q: What's the difference between a standard two shaft shredder and a hydraulic two shaft shredder?
    加 Created with Sketch.
    形状 Created with Sketch.
    A: Both machines use dual-shaft shearing technology, but they are designed for different applications.
    • Standard Two Shaft Shredders offer the widest material compatibility and are suitable for plastics, wood, tyres, e-waste, RDF, and general industrial waste.
    • Hydraulic Two Shaft Shredders provide much higher torque through hydraulic drive, making them ideal for heavy ferrous and nonferrous scrap such as ELVs, scrap cars, car bodies, and thick aluminium.
    If your business mainly handles bulky metal scrap or end-of-life vehicles, a hydraulic two shaft shredder is usually the better choice.
  • Q: What Output Size Can Different Shredders Produce?
    加 Created with Sketch.
    形状 Created with Sketch.
    A: Different shredders produce different output sizes depending on their cutting design and whether they use screens.
    • Single Shaft Shredders typically produce 20mm or 40mm output using interchangeable screens.
    • Four Shaft Shredders usually produce 40mm or 60mm material for more controlled size reduction.
    • Hammer Mills deliver finer output, commonly 8mm or 12mm, for high-purity material recovery.
    • Two Shaft Shredders produce irregular strips without screens, making them ideal for primary shredding before downstream processing.
  • Q: Which shredder is suitable for processing scrap cars or ELVs?
    加 Created with Sketch.
    形状 Created with Sketch.
    A: It depends on your recycling goals.
    • Hydraulic Two Shaft Scrap Metal Shredders suits for for primary size reduction. They quickly cut vehicle bodies into smaller pieces, reducing volume for easier transport and downstream processing.
    • A Horizontal Hammer Mill is designed for secondary shredding. This machine further liberate metals, remove attached waste materials such as paint and oil residues, and produce cleaner materials for higher-value recovery.
    For high-volume ELV recycling plants, many recyclers combine both machines into one processing line. The hydraulic two shaft shredder performs the initial shredding, while the hammer mill completes fine shredding and material cleaning. This configuration delivers higher throughput and better recovery efficiency than using a hammer mill alone.
  • Q: Can one shredder process different materials?
    加 Created with Sketch.
    形状 Created with Sketch.
    A: Yes, but the best shredder depends on the material you process.
    • Standard Two Shaft Shredders are suitable for plastics, wood, tyres, RDF, and mixed industrial waste.
    • Hydraulic Two Shaft Shredders are designed for heavy metal scrap.
    • Single Shaft Shredders work well for baled materials and medium-hard waste.
    • Hammer Mills are commonly used when higher metal liberation is required.
Enerpat is a global company specializing in waste-recycling and disposal solutions, with a mission to help customers build a better, more sustainable world. We are a leading global provider for municipal and industrial clients, helping them recycle and dispose of waste, reduce costs and consumption, and create more value.

We focus on sorters, shredders, balers, shears, and disposal equipment for a wide range of recycling needs. Enerpat believes that “Quality Transform The World.” We deliver the industry’s highest levels of quality and service. Choosing Enerpat means choosing trust and value.
 

Get To Know Us

Products

Contact Us

Tel:+1 (909)-996-3687
Tel:+1 (909)-996-3563
Email:info@enerpatrecycling.com
About Us

About Us | News | Contact ENERPAT | Product

Copyright © 2024 ENERPAT AMERICA. All rights reserved.