AMB-H1075-100 Baler for Scrap Metal

Engineered for continuous, high-efficiency scrap metal processing, the ENERPAT AMB-H1075-100 hopper-style baler for scrap metal compacts metal turnings, aluminum chips, UBC cans, and light scrap into dense, uniform bales. Powered by a 100-ton hydraulic press system and capable of producing up to 60 bales per hour, it eliminates continuous feeding downtime, drastically reduces transportation and storage costs, and optimizes recycling profitability.

Statement: Actual equipment received by customer subject to confirmation with sales.


Availability:



Inquire

Model:
AMB-H
Brand:
ENERPAT

Product Video

Watch the ENEPART AMB-H1075-100 baler for scrap metal in Action

In this operational video, the ENERPAT automatic hopper-style scrap metal baler demonstrates its high-efficiency, fully automatic compression cycle under continuous working conditions in a real recycling facility, processing lightweight materials such as aluminum chips, UBC cans, metal turnings, and tire wire into high-density bales at speeds up to 60 bales per hour. Featuring a large-opening hopper with a level sensor and a 100-ton hydraulic press system, the machine enables uninterrupted feeding and smooth, synchronized execution from feeding through compaction to automatic bale discharge. Ultimately, this demonstration highlights the equipment's heavy-duty reliability, advanced automation, and exceptional adaptability, proving its value in streamlining workflows and maximizing profitability in modern scrap recycling operations.

Product Description

ENERPAT AMB-H1075-100 Hopper-Style Baler for Scrap Metal

Also known as hopper style metal baler, automatic scrap metal compactor, hopper feed aluminum chip baler, UBC can baler machine, etc.

If you're processing high volumes of light scrap metal—from aluminum chips, extrusions, and metal turnings to used beverage cans (UBC), stainless steel wires, and oil filters—you've likely faced a common challenge: loose, low-density material quickly fills up valuable facility space. Bulky scrap metal is difficult to stack, slows down handling and loading, and drives up transportation and labor costs. As your daily throughput increases, these inefficiencies can start to erode overall profitability.

The ENERPAT AMB-H1075-100 Hopper-Style Baler for Scrap Metal is engineered to address these challenges at scale. Powered by a 100-ton hydraulic compression system and a 40 HP motor, it features a 39.37 × 29.53 in press chamber to compact light metal scrap into dense, uniform 11.81 × 11.81 in bales. Its large open-type hopper equipped with an integrated level sensor supports continuous feeding with zero downtime, eliminating batch loading delays and achieving an impressive capacity of up to 60 bales per hour. Built with premium German Rexroth hydraulic valves, Siemens/Schneider PLC touchscreen controls, and UK Hallite cylinder seals, the AMB-H1075-100 delivers high-speed, fully automatic processing with minimal manual intervention—making it an ideal solution for metal recycling centers, CNC machine shops, aluminum processors, and resource recovery facilities.

Composition and Structure

Applications

Main application: environmental protection industries, recycling industries, steel plants, non-ferrous metal plants, smelting industries, electrical industries, aluminum profile manufacturing industries, aluminum foil manufacturing industries, etc.

Product Details

5 Key Core Advantages

Robust Frame & Reinforced Structure

Constructed from international standard branded steel plates using precision CNC plasma cutting and CO₂ welding with flaw detection, the AMB-H1075-100 baler for scrap metal features a heavy-duty structure engineered for continuous, long-term industrial operations. The reinforced body ensures maximum durability and structural stability under high compaction loads.
High-Precision Hydraulic Pressing Cylinder

The machine incorporates a 100-ton press force system utilizing international standard seamless steel pipes, chrome-plated piston rods, and premium Hallite (UK) seals. This configuration guarantees smooth hydraulic performance, prevents oil leakage, and delivers reliable 11.81 × 11.81 in high-density bales.
Large Open Hopper with Level Sensor

Designed for maximum feeding efficiency, the large open-type hopper is equipped with an integrated level sensor that supports automated, uninterrupted continuous feeding. This gravity-feed system eliminates manual waiting time and enables processing speeds up to 60 bales per hour.
Advanced PLC Smart Electrical Control

Factory assembled, wired, and tested with IEC standard 2.5 mm² PVC insulated copper wiring, the control cabinet supports Siemens or Schneider PLC systems with an intuitive touchscreen interface. Operators can effortlessly control automated cycling, adjust parameters, and monitor operational status.
Premium Hydraulic Valve & Cooling System

Equipped with top-tier Rexroth hydraulic valves and a dedicated air conditioner cooling system, the hydraulic power pack maintains optimal oil temperatures during 24/7 continuous operation. This prevents overheating, preserves system components, and ensures consistent hydraulic output.

SUBMIT

Design Concept & Product Story

It usually begins the same way—scrap metal piling up, and floor space slowly disappearing. Aluminum chips, UBC cans, metal turnings, and shavings keep pouring in from machining lines. Trucks leave half-loaded, shop floors get crowded, and scrap handling becomes a daily drain on labor efficiency and operational margins.

In real scrap metal recycling and machine shop environments, we saw this exact pattern everywhere. Materials don't arrive in clean, uniform shapes—they are loose, light, springy, bulky, and difficult to manage manually. That is why the ENERPAT AMB-H1075-100 hopper-style baler for scrap metal was not designed around a theoretical machine concept, but around this real-world industrial challenge.

From that understanding came a system built for non-stop productivity: 100 tons of hydraulic pressing force powered by a 40 HP motor, a large open hopper with an integrated level sensor for continuous feeding, and a 39.37 × 29.53 in press chamber. Guided by Siemens or Schneider PLC automation, it quietly turns springy, bulky metal scrap into high-density 11.81 × 11.81 in bales at speeds up to 60 bales per hour—ready for streamlined transport, remelting, and maximum value recovery.

Get A Quote

FAQs

Q1: What materials can the AMB-H1075-100 baler for scrap metal process?

It is engineered for lightweight scrap metals, including aluminum chips, UBC cans, metal turnings, steel wires, oil filters, and aluminum extrusions.
Q2: What are the main force and power specifications of the AMB-H1075-100?

The machine delivers a 100-ton hydraulic pressing force powered by a 40 HP main motor.
Q3: What are the press chamber dimensions and finished bale sizes?

It features a press chamber size of 39.37 × 29.53 inches and produces uniform bales of 11.81 × 11.81 inches.
Q4: What is the hourly output capacity of this model?

It achieves an automated production speed of up to 60 bales per hour (1–10 tons/h depending on material density).
Q5: Does material feeding require stopping the baler cycle?

No, the large-opening hopper equipped with a level sensor supports continuous feeding without production downtime.
Q6: What critical hydraulic and electrical components are integrated?

It incorporates Rexroth hydraulic valves, UK Hallite cylinder seals, an air conditioner cooling system, and Schneider/Siemens PLC systems.
Q7: How is the electrical control system configured?

Factory-assembled with IEC standard 2.5 mm² PVC insulated copper wiring, it operates via an intuitive PLC touch screen.
Q8: Can the feeding hopper be customized for automated conveyor lines?

Yes, the open feeding hopper accepts customized designs to integrate directly with conveyors or existing plant layouts.
Q9: What structural fabrication standards are applied to the frame?

Constructed with international standard branded steel plate, CNC plasma cutting, and CO2 welding with weld flaw detection.
Q10: What certification standards does the equipment comply with?

Built using UK technology standards, the machine is 100% quality verified with full CE and ISO certifications.

Technical Data Sheet

Model	AMB -H1075-100	AMB -H1075-250	AMB -H1510-160	AMB -H2014-250
Press Force (Tons)	100	250	160	250
Motor Power (HP)	40	59	50	99
Press Chamber (in)	39.37×29.53	39.37×29.53	59.06×39.37	78.74×55.12
Bale Size (in)	11.81×11.81	9.84×9.84	13.78×13.78	15.75×15.75
Capacity (Bales/h)	60	60	60	60
Operation Type	Automatic	Automatic	Automatic	Automatic