303 E. Parson St. Galion, OH 44833    +1 (909)-996-3687    info@enerpatrecycling.com
 
Reliable, Durable & Efficient 
— Your Trusted One-Stop Recycling Equipment Partner
              
You are here: ENERPAT Home » News » Service News » Bayswater, Australia | Lithium-Ion Battery Recycling Line | Pre-Sales Technical Consultation | ENERPAT

Bayswater, Australia | Lithium-Ion Battery Recycling Line | Pre-Sales Technical Consultation | ENERPAT

Views: 0     Author: ENERPAT     Publish Time: 2026-11-18      Origin: Site

Inquire

ENERPAT Visits Australian Customer to Discuss a Lithium-Ion Battery Recycling Line

On November 11, 2026, ENERPAT's Australian team visited a recycling and environmental services company in Bayswater, Melbourne, to discuss a new Lithium-Ion Battery Recycling Line project.

The meeting focused on developing an integrated recycling solution for processing end-of-life automotive batteries, energy storage batteries, electric scooters, speakers and other battery-containing products.

The customer is looking for a solution that can reduce manual dismantling requirements, process selected products as complete units, and recover valuable materials throughout the recycling process, particularly battery black mass.

ENERPAT representative Paul discussed the proposed equipment configuration, material handling requirements, multi-stage shredding process and downstream separation technologies with the customer.

Lithium-Ion Battery Recycling Line

1. Project Requirements: Processing Different Types of Lithium-Ion Batteries

The customer has experience in waste management, environmental engineering and battery recycling projects. The new project involves expanding its processing capabilities to handle different types of end-of-life lithium-ion batteries and battery-containing products.

The materials discussed during the visit included:

  • Automotive lithium-ion batteries and battery cells

  • Energy storage system (ESS) batteries

  • Electric scooter batteries and complete electric scooters

  • Speakers and other battery-containing electronic products

One of the customer's main challenges is the labour required for manual dismantling.

For selected feedstocks, particularly electric scooters and speakers, the customer wants to investigate whole-unit feeding rather than manually removing every component before processing.

This creates several important requirements for the proposed battery recycling equipment:

Whole-Unit Processing: The system needs to accommodate selected complete products, subject to feedstock assessment and safety validation.

Heavy-Duty Shredding: Steel housings and other rigid components can create significant impact loads during primary shredding.

Controlled Particle Size: Multiple crushing stages are required to achieve the target material sizes for downstream separation.

Black Mass Recovery: The customer wants to recover black mass generated throughout the processing line and minimise the loss of valuable fine materials.

The proposed Lithium-Ion Battery Recycling Line therefore needs to integrate suitable shredding equipment, material separation technologies, conveying systems and environmental protection equipment.

Processing Different Types of Lithium-Ion Batteries

2. Primary Shredding: Twin Shaft Lithium Battery Shredder

The first major equipment requirement discussed during the meeting was a Twin Shaft Lithium Battery Shredder for primary size reduction.

The customer accepted a twin-shaft shredding solution, with a preliminary discharge size target of approximately 50 mm.

Several technical requirements were identified.

Enclosed Shredding Chamber

The customer prefers an enclosed shredding chamber to support controlled processing and reduce the release of dust and debris.

Heavy-Duty Construction for Metal-Containing Feedstocks

The primary shredder needs to withstand impact from steel components and other rigid materials found in electric scooters, battery housings and electronic products.

The machine configuration must account for the possibility of whole-unit feeding and the presence of steel housings.

Feeding Width

A working feeding width of approximately 1,200–1,500 mm was discussed to accommodate the intended feedstocks.

Controlled Shredding of Aluminium Foil

The customer wants to avoid excessive fragmentation of aluminium foil during primary shredding.

If aluminium fines become mixed with black mass, they may increase contamination and affect the quality and value of the recovered powder.

The customer can accept elongated shredded pieces at this stage, provided the material is suitable for subsequent separation.

Water-Spray Fire Protection Considerations

The customer expressed a preference for a water-spray fire protection approach rather than nitrogen-based inert gas protection, partly because of the additional approval and specialist operating requirements associated with nitrogen installations in New Zealand.

The discussion referenced a controlled spray arrangement rather than completely flooding the shredding chamber.

This remains a customer preference requiring engineering assessment, not a confirmed final safety configuration. Lithium-ion battery shredding requires a dedicated fire and explosion risk assessment. The selection of water spray, inerting or other protective measures must be validated against battery chemistry, feedstock condition, process conditions and applicable local safety requirements.

3. Secondary Shredding: Four Shaft Shredder for Li-ion Batteries

Following primary shredding, the customer discussed a Four Shaft Shredder for Li-ion Batteries as the secondary size-reduction machine.

The preliminary target discharge size is approximately 20 mm.

A screening system is an important requirement for this stage.

The customer specifically wants to reduce the possibility of intact cylindrical battery cells, including 18650 cells, passing through the machine without sufficient size reduction.

The screening system helps control the discharged particle size by retaining oversized materials for further processing.

The proposed secondary shredding stage is intended to:

  • Further reduce the size of primary-shredded battery materials.

  • Improve material liberation for downstream separation.

  • Control output particle size through a screen.

  • Reduce the possibility of intact cylindrical battery cells passing through the process.

  • Prepare the material for magnetic, density and flotation separation.

Combining a Twin Shaft Lithium Battery Shredder with a Four Shaft Shredder for Li-ion Batteries provides a two-stage size-reduction concept for the proposed recycling line.

Final blade configuration, screen aperture and operating parameters will need to be determined through material testing and engineering evaluation.

4. Proposed Lithium-Ion Battery Recycling Line: Process & Equipment Configuration

Beyond the two shredding stages, the customer discussed a multi-stage separation process to recover different material fractions.

The preliminary process concept includes the following equipment.

Stage 1 – Primary Shredding

Equipment: Twin Shaft Lithium Battery Shredder

Selected battery-containing products and other approved feedstocks enter the primary shredding system.

The preliminary discharge size target is approximately 50 mm.

Stage 2 – Wet Separation

Equipment: Float-Sink Separation Tank

The customer discussed using a water-based separation tank to separate material fractions according to their density and floating characteristics.

The proposed separation objectives include:

  • Separating lighter plastic fractions.

  • Separating heavier metal-containing fractions.

  • Collecting fine black mass and other recoverable residues from the water-based process.

The actual separation efficiency will depend on particle size, material liberation, surface condition and water-system design.

Stage 3 – Magnetic Separation

Equipment: Magnetic Separator

Magnetic separation is proposed to remove ferrous materials, including steel fragments from battery housings and other components.

Removing magnetic contaminants helps prepare the remaining material for subsequent processing and non-ferrous metal recovery.

Stage 4 – Screening & Dewatering

Equipment: Vibrating Dewatering Screen

The customer discussed using a bouncing screen or vibrating dewatering equipment to support material separation and moisture reduction.

The preliminary moisture content target is below 20%.

The actual result will depend on incoming material characteristics, particle size distribution, water content and equipment configuration.

Stage 5 – Secondary Shredding

Equipment: Four Shaft Shredder for Li-ion Batteries with Screen

The material undergoes a second size-reduction stage, with a preliminary output target of approximately 20 mm.

The screen is intended to control particle size and reduce the risk of intact cylindrical cells passing through the processing system.

Stage 6 – Density & Flotation Separation

Equipment: Density Separator & Flotation Tank

After secondary shredding, the material enters further separation stages.

A density separator can separate different material fractions according to their specific gravity, while a flotation system can help separate materials based on differences in surface properties and flotation behaviour.

These stages are intended to improve the separation of copper, aluminium, plastics and other material fractions.

Stage 7 – Fine Size Reduction

Equipment: Industrial Granulator

The customer discussed an additional granulation stage with a preliminary discharge size target of below 5 mm.

Further size reduction can help liberate residual materials and prepare the feedstock for subsequent separation.

Stage 8 – Final Material Recovery & Briquetting

Equipment: Separation System & Briquetting Press

The final processing stages will focus on recovering valuable material fractions and collecting fine battery residues.

A briquetting press may be considered where the properties of the recovered powder or other suitable material fractions require compaction for handling, storage or transportation.

The final equipment selection will depend on the material composition and the customer's product requirements.

Lithium-Ion Battery Recycling Line: Process & Equipment Configuration

5. Auxiliary Equipment for the Li-Ion Battery Recycling System

In addition to the main processing machinery, the proposed Li-Ion Battery Recycling System will require suitable auxiliary equipment.

Shaftless Screw Conveyor

The customer prefers shaftless screw conveyors for transferring long or irregular shredded materials. The shaftless design can reduce the risk of material wrapping around a central shaft and causing conveying blockages.

Industrial Dust Collection System

A dust collection system is required to manage dust generated during shredding, crushing, granulation and screening.

Filter Press & Wastewater Treatment System

A filter press and supporting wastewater treatment equipment are proposed for managing process water and separating suspended solids from wastewater generated during wet separation.

The final process arrangement will be determined after confirming feedstock composition, throughput, factory layout and required output specifications.

6. ENERPAT Technical Consultation & Project Follow-Up

For a complex Lithium-Ion Battery Recycling Line, selecting individual machines is only one part of the engineering process.

The equipment configuration must also account for material characteristics, processing capacity, feeding methods, site conditions, fire protection and the quality of recovered products.

Following the meeting, ENERPAT identified several key items requiring further confirmation before preparing a detailed technical proposal.

Feedstock Details: Battery chemistry, product dimensions, material composition and the proportion of different feedstocks.

Processing Capacity: Required hourly throughput and expected operating hours.

Feeding Method: Manual or mechanical feeding arrangements and the availability of suitable loading equipment.

Factory Layout: Workshop dimensions, equipment installation space and process layout drawings.

Project Schedule: Expected installation and commissioning timeline.

Final Product Requirements: Desired particle sizes, black mass recovery objectives and specifications for recovered copper, aluminium and plastic fractions.

Once these details are confirmed, ENERPAT can further evaluate the process flow, equipment selection and complete system configuration.

7. Developing Lithium-Ion Battery Recycling Solutions with ENERPAT

Lithium-ion battery recycling involves multiple challenges, from handling different battery-containing products to controlling particle size and recovering valuable materials.

An effective Lithium-Ion Battery Recycling Line needs to integrate suitable shredding equipment, separation technologies, material conveying and environmental protection systems.

Through this technical consultation in Australia, ENERPAT gained a clearer understanding of the customer's proposed battery recycling project and its key equipment requirements.

From Twin Shaft Lithium Battery Shredders and Four Shaft Shredders for Li-ion Batteries to Magnetic Separators, Industrial Granulators and complete battery recycling systems, ENERPAT continues to develop recycling equipment solutions for industrial waste and resource recovery applications.

Planning a Lithium-Ion Battery Recycling Line?

Contact ENERPAT to discuss your battery materials, processing capacity and recovery targets. Our technical team can help evaluate suitable battery shredding, separation and black mass recovery solutions for your project.

Online Feedback
Enerpat is a global company specializing in waste-recycling and disposal solutions, with a mission to help customers build a better, more sustainable world. We are a leading global provider for municipal and industrial clients, helping them recycle and dispose of waste, reduce costs and consumption, and create more value.

We focus on sorters, shredders, balers, shears, and disposal equipment for a wide range of recycling needs. Enerpat believes that “Quality Transform The World.” We deliver the industry’s highest levels of quality and service. Choosing Enerpat means choosing trust and value.
 

Get To Know Us

Products

Contact Us

Tel:+1 (909)-996-3687
Tel:+1 (909)-996-3563
Email:info@enerpatrecycling.com
We Are Proud Members Of:
About Us
Copyright © 2024 ENERPAT AMERICA. All rights reserved.