Views: 0 Author: ENERPAT Publish Time: 2026-11-17 Origin: Site
Table of Contents
On November 16, 2026, ENERPAT's sales and after-sales service representatives, together with its local Portuguese partner, visited an industrial waste management and metal recycling company in Portugal to discuss a new stainless steel scrap compaction project.
The customer handles hazardous and non-hazardous industrial waste, metal scrap recycling and Waste Electrical and Electronic Equipment (WEEE) collection and sorting.
The current project focuses on compressing two types of bulky metal scrap: stainless steel heat exchanger coils and water storage tanks. With an estimated processing requirement of approximately 2 tons per hour, the customer needs a larger and more capable hydraulic scrap metal baler to replace its existing small machine.
During the consultation, ENERPAT assessed the customer's material dimensions, existing equipment limitations and production requirements. Two heavy-duty lid-style metal baler configurations, the AMB-L2520-250T and AMB-L2520-315T, were recommended for further evaluation.
The customer currently operates a small scrap metal baler. However, the existing machine cannot accommodate the relatively large dimensions of the stainless steel heat exchanger coils generated by its recycling operations.
As a result, the customer is considering upgrading to a larger hydraulic metal baler capable of processing bulky stainless steel materials more effectively.
The two main feedstock categories discussed during the visit were:
The customer provided the following material specifications:
Tube outside diameter: 28 mm
Tube wall thickness: 2 mm
These stainless steel heat exchanger coils consist of tubular structures that can be difficult to handle in their original form. Their overall dimensions and arrangement need to be considered when selecting the loading chamber and compression configuration.
The second material category consists of used water storage tanks.
The dimensions provided during the discussion included:
Length: Less than 2 metres
Diameter: Less than 1 metre
These bulky metal containers also require suitable chamber dimensions and loading arrangements before hydraulic compression.
For both materials, the customer's main objective is to reduce scrap volume and improve handling efficiency through a suitable industrial scrap metal baler.
Based on the customer's requirements, ENERPAT recommended two models from its AMB-L2520 lid-style scrap metal baler range:
Both configurations are designed for heavy-duty metal scrap compression and are worth evaluating for applications involving bulky stainless steel scrap, heat exchanger coils, metal tanks and other irregular metal materials.
The consultation focused on helping the customer understand the differences between the two compression-force configurations and how these differences relate to its actual processing requirements.
The customer showed a preference for the AMB-L2520-315T because of its higher compression force. However, the available investment budget was a major consideration.
The AMB-L2520-250T therefore remained the more practical option under the customer's current budget conditions.
ENERPAT discussed both models to help the customer evaluate equipment capability, investment requirements and long-term operating needs.
The final selection should consider more than nominal hydraulic force. Material dimensions, loading conditions, required bale specifications and the target throughput of approximately 2 tons per hour must also be taken into account.
Processing stainless steel heat exchanger coils and water storage tanks requires careful equipment selection because these materials have different physical structures and loading characteristics.
Several factors should be assessed before confirming the final scrap metal baler configuration.
The dimensions of heat exchanger coils and water tanks must be checked against the baler's loading chamber. Bulky materials need sufficient loading space and an appropriate feeding arrangement.
The 250T and 315T configurations offer different nominal compression forces. The appropriate model should be selected according to actual material characteristics, required bale quality and operating conditions.
Stainless steel heat exchanger coils contain tubular structures, while water storage tanks are larger hollow metal containers. Their geometry and arrangement can influence how materials are loaded and compressed.
The customer's estimated requirement is approximately 2 tons per hour. Actual output should be verified through representative material testing and consideration of the complete loading and baling cycle.
Bale dimensions, density and handling requirements should be considered in relation to downstream storage, transportation and metal recycling operations.
ENERPAT's approach is to evaluate the actual feedstock and operating requirements before confirming the final hydraulic metal baler configuration.
The customer is currently reviewing the proposed equipment internally.
Its purchasing process involves several approval stages. The company needs to complete and submit its annual operating report before obtaining investment approval for the following year.
The purchasing decision is therefore expected in January 2027.
Although the customer currently prefers the AMB-L2520-315T, the AMB-L2520-250T remains a practical alternative given the current budget considerations.
ENERPAT's Portuguese partner will continue communicating with the customer to understand the available investment budget and internal approval schedule.
The team will also provide additional technical information and model-specific equipment demonstrations to help the customer compare the two configurations before making a final decision.
ENERPAT provides hydraulic scrap metal balers for metal recycling companies, industrial waste management operators and manufacturers handling bulky metal scrap.
For applications involving stainless steel heat exchanger coils, water storage tanks, stainless steel scrap and other irregular metal materials, selecting the right baler requires consideration of material dimensions, loading conditions, compression requirements and target throughput.
ENERPAT's metal recycling equipment range includes:
Lid-Style Scrap Metal Baler: For compressing bulky and irregular metal scrap, including stainless steel scrap and other dense metal materials.
Hydraulic Metal Baler: For reducing the volume of loose metal scrap into compact bundles.
Stainless Steel Scrap Baler: For industrial stainless steel scrap handling and volume reduction.
Metal Scrap Compactor: A related equipment term for hydraulic metal scrap compression applications.
Scrap Metal Recycling Equipment: Equipment solutions for industrial metal waste reduction, handling and recycling.
From initial site consultation and material assessment to equipment selection and technical support, ENERPAT works with customers to identify suitable scrap metal baling solutions based on their actual operating requirements.
Looking for a scrap metal baler for stainless steel heat exchanger coils, water storage tanks or other bulky metal scrap? Contact ENERPAT to discuss your material dimensions, processing capacity and equipment requirements.
About Us | News | Contact ENERPAT | Product