On October 21, 2026, ENERPAT held a technical consultation with a major waste management operator in Qatar to explore wood waste recycling and wood shavings production.
The company handles various industrial waste streams and operates an industrial waste treatment facility. It also generates substantial quantities of waste wood, including used wooden pallets, but does not currently have dedicated equipment to convert this material into controlled-size wood shavings.
The discussion focused on the ENERPAT EWS30 Wood Shavings Machine as a standalone equipment solution. Rather than investing in a complete production line from the outset, the customer is considering starting with one machine and integrating it into existing operations.
The longer-term objective is to recover more value from waste wood, reduce reliance on purchased drying materials where technically feasible, and explore the use of processed wood as a supplementary fuel.
Customer Requirements: Turning Waste Wood into a Useful Resource
The customer identified two potential applications for wood shavings produced from recovered timber and wooden pallets.
1. Exploring an Alternative Absorbent for Industrial Waste Treatment
The customer currently uses a soda-based material during the handling of certain industrial waste streams, including chemical dye residues and oily sludge. The associated material costs have prompted an evaluation of alternative absorbents.
Wood shavings may offer useful liquid absorption properties, depending on the wood type, particle size, moisture content, and characteristics of the waste being treated. The customer is therefore exploring whether locally recovered wood can serve as a practical alternative in selected applications.
Any substitution must be validated through material compatibility tests and the customer's approved waste treatment procedures. Absorption performance, chemical compatibility, combustion characteristics, and regulatory requirements must be assessed before changing the existing process.
2. Preparing Wood Shavings for Fuel Use
The second potential application is energy recovery. The customer operates an incineration facility and is interested in assessing whether suitable wood shavings could be used as a supplementary fuel.
For this application, the main considerations include moisture content, particle size, calorific value, contamination, and compatibility with the existing combustion system.
ENERPAT discussed how the appropriate wood processing and moisture control configuration could be selected around these requirements. Actual fuel suitability and operating performance would need to be confirmed through testing and the facility's technical assessment.
During the consultation, ENERPAT introduced its wood shavings production process and recommended the EWS30 Wood Shavings Machineas the initial equipment option.
The customer prefers to begin with a single machine rather than immediately investing in a complete wood shaving production line. This phased approach allows the operation to evaluate output quality, material utilization, and downstream application requirements before considering further expansion.
The EWS30 is a four-shaft wood shaving machine designed to convert suitable wood feedstock into wood shavings. Key points discussed during the meeting included:
Processing capacity: Approximately 1–1.3 tons per hour was discussed during the consultation; the final guaranteed capacity must be confirmed against the actual feedstock and selected configuration.
Shaving size: The proposed output was approximately 1–1.1 cm, subject to confirmation of the required cutting configuration and final particle dimensions.
Cutting components: The discussion covered tool-steel blades, their screw-mounted arrangement, and practical replacement procedures.
Electrical components: Schneider, Siemens, and Omron were discussed as component brands for the proposed configuration. The exact bill of materials should be confirmed in the final quotation.
For a waste management operator processing recovered timber, equipment selection should account for the condition and dimensions of incoming wood, the presence of nails or other contaminants, and the desired shaving characteristics.
The EWS30 is the proposed starting point for this project. Additional processing equipment can be considered later if production demand or material requirements justify a larger system.
Moisture Control: Is a Wood Shavings Dryer Necessary?
Moisture content was one of the main technical topics discussed during the meeting.
ENERPAT demonstrated a moisture meter, and the customer's wood sample was measured at approximately 17% moisture content during the visit. This reading provides an initial reference, but it does not establish the moisture level of every incoming load or the final suitability of the material for its intended application.
The consultation covered two possible configurations:
Option 1: Standalone EWS30 Wood Shavings Machine
If representative wood samples consistently meet the moisture and performance requirements of the intended application, the customer may be able to begin with the EWS30 alone. This would avoid the additional capital investment and operating requirements associated with a drying system.
Option 2: Wood Shavings Production Line with a Drying System
If the feedstock requires further moisture reduction, the process could be expanded to include an industrial wood shavings dryer. A natural gas-fired heating system was discussed as a potential option because it allows controlled heat input, subject to site utilities and engineering requirements.
The appropriate choice depends on the actual moisture range, desired final product, fuel requirements, and operating conditions. Drying should not be added or omitted solely on the basis of a single moisture reading.
From a Single Machine to a Future Wood Shavings Production Line
Although the current requirement is for standalone equipment, ENERPAT also introduced the main stages of a complete wood shavings production line using a process illustration and 3D model.
Depending on the customer's future requirements, the system could incorporate:
Wood Shavings Machine: The EWS30 processes suitable timber and pallet wood into shavings.
Industrial Wood Shavings Dryer: Reduces moisture when required by the target application.
Screening Machine: Separates material by size and removes unwanted fines where necessary.
Bagging and Packaging Equipment: Handles the collection and packaging of loose wood shavings if a packaged product is required.
Conveyors and Material Handling: Connects the processing stages and reduces manual handling.
These components are potential future additions, not equipment confirmed for the current purchase. The initial recommendation remains the EWS30 standalone machine.
The customer also indicated a longer-term interest in establishing a wooden pallet production line, with a potential target of approximately 20,000–25,000 pallets per month. If this plan proceeds, the resulting material flows and wood processing requirements can be reviewed as part of a broader recycling and manufacturing strategy.
Equipment Reliability and After-Sales Support
During the consultation, ENERPAT explained the proposed machine configuration, blade replacement arrangements, and the importance of selecting suitable components for reliable operation.
Reference projects in the Middle East and North Africa were also discussed to help the customer assess ENERPAT's equipment experience and service capabilities.
For a standalone Wood Shavings Machine, the next stage is to confirm the feedstock specifications, required output, electrical configuration, installation conditions, and maintenance expectations. Wear-part replacement intervals should be established using the final machine configuration, operating hours, and actual material conditions rather than an assumed fixed service life.
ENERPAT can also assess the need for additional equipment as the customer's wood recycling operations develop.
Next Steps
Following the consultation, the proposed follow-up actions are:
Provide EWS30 operating videos, technical specifications, and relevant wood shavings application references.
Prepare a formal quotation for the standalone EWS30 configuration.
Confirm the customer's available installation space, electrical supply, and preferred machine configuration.
Review whether a wood shavings dryer is necessary based on representative moisture measurements and the intended end use.
Clarify the technical requirements for using wood shavings in industrial waste treatment or as supplementary fuel.
Arrange a potential factory visit so the customer can inspect the equipment and discuss future expansion options.
ENERPAT Wood Shavings Machine Solutions
ENERPAT supplies industrial wood processing equipment for businesses looking to recover value from waste wood, timber offcuts, and suitable wooden pallets.
The EWS30 Wood Shavings Machine provides a starting point for customers who want to evaluate wood shavings production before committing to a larger processing line. Depending on the application, the system may later be expanded with a wood shavings dryer, screening machine, conveyors, and bagging equipment.
For waste management operators considering wood shavings as an absorbent or biomass fuel, the recommended configuration should be based on feedstock characteristics, target moisture content, output specifications, and downstream process requirements.
Considering a Wood Shavings Machine for waste wood recovery? Contact ENERPAT to discuss your material, target capacity, and whether a standalone EWS30 or an expandable production line is the right fit for your operation.
Enerpat is a global company specializing in waste-recycling and disposal solutions, with a mission to help customers build a better, more sustainable world. We are a leading global provider for municipal and industrial clients, helping them recycle and dispose of waste, reduce costs and consumption, and create more value.
We focus on sorters, shredders, balers, shears, and disposal equipment for a wide range of recycling needs. Enerpat believes that “Quality Transform The World.” We deliver the industry’s highest levels of quality and service. Choosing Enerpat means choosing trust and value.
English
